Home | Products | Where To Buy | FAQ | Videos | Players | Support | Contact

 

Tremol-No™ Pin-type
Part # BP-2005-010

Buy the Pin-type now!

The Tremol-No Pin-type is designed to work with tremolo blocks that do not have a flat base, such as those that around rounded or beveled (to allow for more tremolo travel).
Its design allows for solid attachment of the Tremol-No Receiver section to the tremolo block utilizing the the spring hole in the tremolo block.
The Pin-type can work with other tremolo blocks, such as Wilkinson, Floyd Rose, and PRS.
1.5mm SPRING HOLE DIAMETER IS REQUIRED TO USE THE PIN-TYPE!


Tremol-No Pin-type Installation Video


"Which Tremol-No™ model works with my trem?"
Check out the Works With list:
CLICK HERE!


About Us | Security | Privacy Policy | Employment & Endorsements | Contact Us
U.S. Patents #7,145,065 & 7,427,703

This website, all contents within, and the Tremol-No device and design are ©2017 Tremol-No, LLC. All Rights Reserved
Use, whole or in part, is only permitted with written authorization.