Home | Products | Where To Buy | FAQ | Videos | Players | Support | Contact

 

Tremol-No™ Large Clamp-type
Part # BP-2006-010

Buy the Large Clamp-type now!

The Tremol-No Large Clamp type is designed to work with tremolo blocks that are thicker than 10mm.
The Large Clamp is designed to attach to very thick tremolo blocks (up to 14mm), like those found on vintage Strats, PRS, and upgraded Floyd Rose tremolo blocks.
The Large Clamp-type can work with thinner tremolo blocks, but the clamping screw and alignment pins on the tailpiece
will extend further than necessary, and may prevent full tremolo travel.


Tremol-No Clamp-type Installation Video


"Which Tremol-No™ model works with my trem?"
Check out the Works With list:
CLICK HERE!


About Us | Security | Privacy Policy | Employment & Endorsements | Contact Us
U.S. Patents #7,145,065 & 7,427,703

This website, all contents within, and the Tremol-No device and design are ©2017 Tremol-No, LLC. All Rights Reserved
Use, whole or in part, is only permitted with written authorization.